Select Page
Free Printable Christmas Light Bulb Gingerbread Cookies Template
Free to print. The PDF opens in a new tab, so this page stays open for the steps. Print tips

Christmas light cookies look like the street on the first night the houses light up. One fat old-fashioned bulb, a silver socket and a bright streak of shine, and the tray starts to glow.

This set uses one free printable template with four light bulb shapes, a cut-out dough that keeps the socket square in the oven and the royal icing cure times from our icing pages. It is for anyone baking for a lights tour night, a cookie swap, or a tray of kids who want every color at once.

You get an icing palette, three steps for each design, a picker and a party batch planner. Start with the recipe card, then the shapes.

Christmas Light Bulb Gingerbread Cookies
Makes about 32 cookies, about 3 1/4 inch bulbs and 3 1/2 inch light strings · Prep 30 minutes · Bake 11 minutes · Chill and freeze 2 hours 30 minutes · Icing cure overnight, 8 hours
Total time about 11 hours, most of it hands off. The overnight cure is what lets you stack them in a tin.

Equipment: Stand or hand mixer, Rolling pin with 1/4 inch guides, The free template printed on card stock, A small sharp paring knife, Two light-colored half sheet pans, Parchment paper, Piping bags with small round tips, Toothpicks or a scribe tool, A soft small paintbrush for the gold bulb.

Template: free 1-page PDF, US Letter, an old-style bulb, a chubby bulb, a string of three bulbs and a glow disc, with icing guides and a 1 inch test bar.

Ingredients

Dough

  • 3 cups all-purpose flour, 360 g, spooned and levelled
  • 1 teaspoon baking soda
  • 1/2 teaspoon salt
  • 1 tablespoon ground ginger
  • 1 1/2 teaspoons ground cinnamon
  • 1/2 teaspoon ground cloves
  • 1/4 teaspoon ground nutmeg
  • 3/4 cup unsalted butter, 170 g, softened but still cool
  • 3/4 cup dark brown sugar, packed, 150 g
  • 1/2 cup unsulphured molasses, 170 g
  • 1 large egg
  • 1 teaspoon vanilla extract

Royal icing, a double batch

  • 1/4 cup meringue powder
  • 1/2 cup cold water, plus a few drops more for flooding
  • 1/2 teaspoon cream of tartar
  • 4 cups confectioners sugar, unsifted, 454 g
  • Red, green, yellow, gold, blue, navy, pink, black and gray gel food coloring, or the shades from the palette chart
  • Clear sparkle sugar, for the snowy and frosted bulbs, and edible gold luster dust with a few drops of lemon extract, for the gold bulb
  • For the no-bake lights: round store-bought butter cookies, white frosting, black licorice lace and candy-coated chocolates

Method

  1. Make the dough: whisk the flour, soda, salt and spices, cream the butter and brown sugar until lighter in color, beat in the molasses, egg and vanilla, then mix in the dry ingredients on low and stop the moment no dry flour remains.
  2. Chill the dough as two flat wrapped discs about an inch thick for 2 hours, until a pressed thumb leaves a clean dent rather than a smear.
  3. Roll each disc to 1/4 inch between two sheets of parchment, so the dough never picks up extra flour.
  4. Cut round the paper shapes laid on the dough with a small sharp knife held straight up, cutting round the sockets last.
  5. Freeze the cut bulbs on the parchment-lined pan for 30 minutes, until the sockets and the light string wire feel hard and lift without bending.
  6. Bake at 350F for 9 to 11 minutes straight from the freezer, until the surface looks matte and the edges are set, then cool completely on the pan.
  7. Mix the icing to stiff peaks, tint the biggest bowl socket silver and keep one white, then tint small bowls of red, green, gold and the accent colors your designs need from the palette chart.
  8. Flood the sockets silver and the glass in its color with a wet-on-wet white shine streak, let the layered designs crust for an hour before their snow, frost, faces and rays go on, then leave the cookies flat overnight.

Notes: times are worked out from the set times on our icing pages, not timed on a build, and ovens vary, so judge by the surface rather than the clock. The yield is an estimate: a batch rolls to about 162 usable square inches at 1/4 inch, and the four shapes average about 4.6 square inches, which gives about 34, rounded down to 32. Bake one test tray before you shop for a big party. Dough adapted from King Arthur Baking gingerbread cut-outs.

Modern lights are tiny dots. The big old-fashioned bulb, round at the shoulder and tapering to a soft point, is the one people still draw when they draw Christmas lights, and it happens to be a perfect cookie shape.

Christmas light fact Where it comes from What the cookie does with it
The first electric tree lights were red, white and blue In December 1882, Edward H. Johnson hand-wired 80 red, white and blue bulbs the size of walnuts on his tree in New York A light string that can go red, white and blue, and a socket on every bulb
Candles came first Electric lights were too expensive for most homes and did not replace candles as the majority until 1930 A glow disc that shows the bulb lit, not just the glass
The C9 name On big holiday bulbs, the C stands for the cone shape and the number is the width in eighths of an inch, so a C9 is about 1 1/8 inches across A cookie bulb about 1 3/4 inches across, half again as wide as a real C9, so the shine streak has room
The shine streak Glass catches a window or a porch light as one bright line down the side A curved shine guide down the left of every bulb, piped white into the wet color

The story starts with a walnut-sized bulb. The first electric Christmas tree was hand-wired with 80 red, white and blue bulbs the size of walnuts, in December 1882, by Edward H. Johnson at his home in New York. That is why the light string on this template has three bulbs and a socket on each one: it looks like a string, not a row of dots.

They took a while to catch on. Electric Christmas lights were too expensive for the average person and did not become the majority replacement for candles until 1930. The glow disc is a small nod to that: a bulb is most charming lit up, so it gets its own night sky.

The shape does the rest. On big holiday bulbs, the C in C9 stands for the cone shape and the 9 means nine eighths of an inch across. Blow that cone up to cookie size and it still reads as a Christmas light from across the room, even without the socket.

One Template, 4 Christmas Light Shapes

Every baked design starts as one of four cookies. The old-style bulb is about 3 1/4 inches tall and 1 3/4 inches across, the chubby bulb about 3 inches tall and 2 inches across, the light string about 3 1/2 inches wide, and the glow disc about 2 7/8 inches round. Four designs share the old-style bulb, so print two copies of that shape.

Christmas light cookies template: an old-style bulb with a socket, a chubby bulb, a string of three bulbs on a swooping wire and a round glow disc with red icing guides
The free template: four shapes, one page.

The free template prints on one US Letter page at 100 percent. Measure the red bar first: if it is not exactly 1 inch, your printer scaled the page.

The red dashed lines are icing guides, not cut lines: two short lines across each socket for the screw ridges, a line where the socket meets the glass, a curved shine streak down the left of the glass, the face on the chubby bulb, and on the glow disc the bulb outline and the halo ring. Dotted circles mark the kawaii eyes.

A script checked the parts most likely to snap. The socket on each single bulb is 0.72 inches wide and the neck under it 0.80 inches, and the thinnest part of the light string, the wire between bulbs, is 0.41 inches, and every guide sits inside its cut line. Lift the light string by its bulbs, never by the wire.

Icing Palette for All 8 Designs

Each row lists the colors one design needs, so you can mix only those bowls. Gel brands vary, so test a spoonful of each on a scrap cookie first.

Design Shape Colors and what they cover Difficulty
The Classic Red Bulb Old-style bulb template cranberry red for the glass; socket silver for the socket; snow white for the shine streak Easy
The Evergreen Bulb with Snow Old-style bulb template pine green for the glass; socket silver for the socket; snow white for the shine and snow Medium
The Gold Shimmer Bulb Old-style bulb template star gold for the glass; socket silver for the socket; snow white for the shine dot Medium
The Frosted Glass Bulb Old-style bulb template frost blue for the glass; socket silver for the socket; snow white for the frost swirls and dots Medium
The Glowing Outline Bulb Glow disc template midnight navy for the night sky; warm yellow for the bulb glass; pale glow for the halo; socket silver for the socket; snow white for the rays and stars Hard
The Kawaii Light Bulb Chubby bulb template bubblegum pink for the glass; socket silver for the socket; coal black for the eyes and smile; blush pink for the cheeks; snow white for the shine dots Medium
The Multicolor Light String String of 3 bulbs template pine green for the wire; cranberry red for the bulb; star gold for the bulb; winter blue for the bulb; socket silver for the sockets; snow white for the shine streaks Hard
No-Bake Christmas Light Cookies for Little Kids Store-bought round butter cookies white frosting for the base; black licorice lace for the wire; candy-coated chocolates for the bulbs Easy

Socket silver goes on all seven baked designs and snow white on all seven too, so mix those two in the biggest bowls. All seven baked designs need 13 colors, but a red and gold box needs only 4. The picker shows each design’s swatches, steps and difficulty, or picks one from who the cookie is for.


Which Christmas Light Cookie Should You Make?
Pick a design to see its icing colors, its three steps and how hard it is. Or say who the cookie is for, filter by skill, or let the button choose.

For ideas only: these palettes are original color choices and gel brands vary in shade, red and navy most of all, so tint a little and test on a scrap cookie. Nothing you pick leaves your browser.


Difficulty follows one rule. Easy means the base colors go on wet-on-wet in one sitting, then the dots and lines. Medium means an accent has to wait for the base to crust before it goes on top, like snow, frost or a face. Hard means two or more layered accents plus fine lines on one cookie.

Ingredient Notes

The dough is a cut-out dough on purpose. It holds a sharp edge. A soft dough puffs, the square socket rounds off, and the bulb stops looking like a bulb.

Silver is gray. Mix the socket color from white with a few drops of black, and keep it a shade lighter than you think: gray darkens as it dries. Edible silver luster dust brushed on once it is dry makes the socket shine, if you have some.

Gold paint needs a dry surface. Use only luster dust labelled edible, mix it with a few drops of lemon extract into a thin paint, and brush it on a flood that has dried overnight. On wet icing it streaks and sinks.

Meringue powder, not raw egg whites. Royal icing is never cooked and a cookie tray sits out for hours, so use meringue powder, dried egg white sold as a pasteurized product. For flood consistency and the full cure table, see how runny to make flood icing for a glossy bulb.

How to Make Christmas Light Cookies Step by Step

1.Make the dough

Whisk the flour, soda, salt and spices, cream the butter and brown sugar until lighter in color, then beat in the molasses, egg and vanilla. Mix in the dry ingredients on low and stop the moment no dry flour remains, so the dough stays tender.

2.Chill the dough

Chill the dough as two flat wrapped discs about an inch thick for 2 hours. It is ready when a pressed thumb leaves a clean dent rather than a smear.

3.Roll the dough

Roll each disc to 1/4 inch between two sheets of parchment. Keep it even: a thin spot along the light string wire is where it cracks.

4.Cut the bulbs

Lay the card stock shapes on the dough and cut round them with a small sharp knife held straight up. Cut round the sockets last, with straight strokes, so their corners stay square. Pull the scraps away from the cookie rather than lifting the cookie out.

Christmas light cookies cut from rolled gingerbread dough on parchment: old-style bulbs, a chubby bulb, a string of three bulbs and a round glow disc
Cut shapes on parchment, ready for the freezer. AI rendering.

5.Freeze the shapes

Slide the parchment onto a pan and freeze the cut bulbs for 30 minutes. They are ready when the sockets and the wire feel hard, which keeps the corners square in the oven.

6.Bake at 350F

Bake for 9 to 11 minutes straight from the freezer. Judge by the surface rather than the clock: matte all over, with edges that are set. Cool completely on the pan, because a warm light string bends at the wire.

7.Mix and color the icing

Beat the icing to stiff peaks. Tint the biggest bowl socket silver and keep one bowl white, then tint small bowls of red, green, gold and the accents. Thin each to flood consistency, keeping a little white and black stiff for snow, rays and faces.

8.Flood the bulbs and pipe the details

Flood the socket silver first, then the glass right up against it. While the glass is still wet, pipe a white line along the shine guide and watch it sink in flat: that one streak is what turns a colored shape into glass. Let the layered designs crust for an hour before the snow, frost, faces and rays go on. Leave everything flat overnight and give small details about 2 hours before anything touches them.

Christmas light cookies drying on parchment, freshly flooded in red, green, gold, frost blue and pink with silver sockets and white shine streaks, no snow, faces or rays yet
The flood coats and shine streaks, drying before the details go on. AI rendering.

Say you are decorating with a six-year-old who wants to do it all. Flood the sockets yourself the night before, then hand over the colors and let them fill the glass. A wobbly bulb with a shine streak still reads as a light.

Each design lists its colors, difficulty and three short steps, plus a no-bake version for the youngest helpers. Four designs share the old-style bulb.

1.The Classic Red Bulb

Christmas light cookies: a classic red bulb gingerbread cookie with glossy cranberry red glass, a white shine streak and a silver socket
The classic red bulb. AI rendering.

Colors: cranberry red, socket silver, snow white. Difficulty: Easy.

The one to bake first. Make a dozen in red and a dozen in the other colors from the palette, and a row of them on a plate already looks like a string of lights.

  1. Flood the socket silver, then the glass red right up against it, in one sitting.
  2. While the red is wet, pipe a white line along the shine guide and let it sink in flat.
  3. Once the socket crusts, pipe two thin white lines across it for the screw ridges.

2.The Evergreen Bulb with Snow

Christmas light cookies: an evergreen bulb gingerbread cookie in pine green with a white shine, thick white snow on the socket and two drips down the glass
The evergreen bulb with snow. AI rendering.

Colors: pine green, socket silver, snow white. Difficulty: Medium.

A bulb that stayed out on the porch overnight. Pipe the snow thick and lumpy, because a neat line of white reads as a stripe.

  1. Flood the socket silver and the glass green with a wet-on-wet white shine streak, and let it crust for an hour.
  2. Pipe thick white snow along the top and shoulders of the socket, and pull two short drips down onto the glass.
  3. Sprinkle the wet snow with clear sparkle sugar and tip off the extra once it sets.

3.The Gold Shimmer Bulb

Christmas light cookies: a gold shimmer bulb gingerbread cookie painted with edible gold luster, a white shine dot and a silver socket
The gold shimmer bulb. AI rendering.

Colors: star gold, socket silver, snow white. Difficulty: Medium.

The one that looks expensive. It takes an extra night, so bake it with the first batch and paint it the next day.

  1. Flood the socket silver and the glass gold, and leave it overnight so the surface is dry enough to paint.
  2. Mix edible gold luster dust with a few drops of lemon extract and paint it thinly over the glass with a soft brush.
  3. Once the paint dries, pipe a white shine dot near the top of the glass and the two socket ridges.

4.The Frosted Glass Bulb

Christmas light cookies: a frosted glass bulb gingerbread cookie in pale frost blue coated in sparkle sugar, with white frost swirls and tiny dots
The frosted glass bulb. AI rendering.

Colors: frost blue, socket silver, snow white. Difficulty: Medium.

The quiet one on a busy tray. Keep the frost swirls thin and few, so the sugar sparkle still shows between them.

  1. Flood the socket silver and the glass frost blue, and cover the wet blue with clear sparkle sugar.
  2. Tip off the loose sugar and let it crust for an hour.
  3. Pipe a few thin white frost swirls across the glass and scatter tiny white dots round them.

5.The Glowing Outline Bulb

Christmas light cookies: a glowing outline bulb gingerbread cookie, a round midnight navy cookie with a warm yellow bulb, a soft pale halo, white rays and stars
The glowing outline bulb. AI rendering.

Colors: midnight navy, warm yellow, pale glow, socket silver, snow white. Difficulty: Hard.

The showpiece and the slowest. The soft glow only works wet-on-wet, so have the navy, the pale glow and the yellow bags ready before you start the disc.

  1. Flood the disc navy, and while it is wet pipe a pale glow ring on the halo guide and flood the bulb yellow inside it, so the edges soften into each other.
  2. Let it crust for an hour, then flood the socket silver on top.
  3. Pipe short white rays out from the halo, a few tiny white stars, and a white shine streak on the bulb.

6.The Kawaii Light Bulb

Christmas light cookies: a kawaii light bulb gingerbread cookie, a chubby bubblegum pink bulb with two black dot eyes, a tiny smile, blush cheeks and a silver socket
The kawaii light bulb. AI rendering.

Colors: bubblegum pink, socket silver, coal black, blush pink, snow white. Difficulty: Medium.

The cutest cookie on the tray. Keep the eyes close together and low on the glass, and a white dot in each eye makes it look lit up.

  1. Flood the socket silver and the glass bubblegum pink, and let it crust for an hour.
  2. Pipe two black dot eyes on the dotted circles and a tiny black smile between the cheek guides.
  3. Add a blush pink dot on each cheek and a tiny white dot in each eye once the black has set.

7.The Multicolor Light String

Christmas light cookies: a multicolor light string gingerbread cookie, a pine green wire with a red, a gold and a blue bulb hanging from it, silver sockets and white shine streaks
The multicolor light string. AI rendering.

Colors: pine green, cranberry red, star gold, winter blue, socket silver, snow white. Difficulty: Hard.

Lay several end to end along the edge of a platter and they join into one long string. For an 1882 tribute, do the three bulbs red, white and blue.

  1. Flood the wire green and the three sockets silver, and let them crust for an hour so the colors stay apart.
  2. Flood the left bulb red, the middle gold and the right blue, with a wet-on-wet white shine streak on each.
  3. Once the bulbs crust, pipe a thin white highlight along the top of the wire and two tiny ridges on each socket.

No-Bake Christmas Light Cookies for Little Kids

Christmas light cookies no-bake version: round butter cookies with white frosting, a black licorice lace wire and candy-coated chocolate bulbs
Store-bought butter cookies strung with candy lights. AI rendering.

Colors: white frosting, black licorice lace, candy-coated chocolates. Difficulty: Easy, no oven.

For a table of four-year-olds. Cut the licorice into short pieces ahead of time so nobody needs scissors.

  1. Spread white frosting over the top of each cookie with a butter knife.
  2. Lay a short piece of black licorice lace across the frosting in a gentle swoop.
  3. Press four or five candy-coated chocolates in a row just under the lace, alternating colors.

Christmas Light Cookies for a Party or a Lights Tour Night

How to set Christmas light cookies out depends on the crowd.

The planner does the math for cookies, batches, colors and days, working the dough out from each shape’s size: the glow disc uses almost twice the dough of the old-style bulb.


Christmas Light Party Cookie Planner
Enter the guests, the cookies each and the party date, then tick the designs. It works out the dough batches from how big each shape is, how many of each to cut, the icing colors and which day each job falls on.

Designs

For planning only: the dough per batch figure is an estimate and dough rolls out differently in every kitchen, so bake one test tray before you shop for a big party. The no-bake version is not counted because it uses store-bought cookies. Nothing you enter leaves your browser.


Picture a party for 12 on a Saturday, with the red, the gold, the kawaii and the light string ticked. The planner calls for 14 cookies, one batch of dough and one double batch of icing in 9 colors, with 4 red bulbs, 4 gold bulbs, 3 kawaii bulbs and 3 light strings. Bake and flood on Wednesday, paint the gold and pipe the faces on Thursday, and Friday stays free in case a wire snaps.

Troubleshooting

Symptom Cause Fix
The light string snapped at the wire Warm dough, or lifting it by the wire Freeze before baking, cool on the pan, and slide a spatula under the bulbs
The socket came out round Soft dough puffed at the corners Bake straight from the freezer, and cut the socket with straight knife strokes
No shine streak shows The white went on after the color crusted, or sank too far Pipe the streak within a minute of flooding, slightly thicker than you think
The gold paint streaked Painted on icing that was not fully dry Wait overnight, then brush a thin coat and let it dry before a second
The glow disc has a hard ring instead of a halo The navy crusted before the glow went in Have all three bags ready, and pipe the glow and yellow into the navy right away

Make-Ahead and Timeline

Plan on three days: bake and flood on day one, gold paint, snow, frost, faces and rays on day two, bag on day three. For a big party, freeze the plain cookies flat and thaw them sealed. For how long decorated cookies stay good to eat, see how long iced bulb cookies keep in a sealed tin.

Storage Instructions

Once cured, store the cookies in an airtight tin at room temperature, with parchment between layers and out of sunlight, which fades reds and pinks.

Lay the light strings flat on the bottom layer, where nothing can press on the wire, and stand the bulbs socket to tip beside them. Hold to the overnight flood cure on our royal icing card before you stack, or the colors will print onto the cookie above.

Frequently Asked Questions

Do I need a Christmas light cookie cutter?

No. The free template does the job for all four shapes. If you own a light bulb cutter, use it for the four single bulb designs and print the template for the chubby bulb, the light string and the glow disc.

Can I make the light string longer?

Not in one piece: past three bulbs the wire gets too long to lift. Bake several and lay them end to end, or pipe a green icing wire on the platter itself to link single bulbs into a string.

Can I hang them on the tree?

Yes. Poke a straw hole through the socket before the dough goes in the freezer, and thread a ribbon once they are cured. For more shapes to hang, see baked gingerbread ornaments to hang on ribbon.

How far ahead can I make Christmas light cookies?

Baked, undecorated shapes freeze for up to about 3 months. Decorated cookies keep about two weeks in an airtight tin once cured, so decorating three days ahead leaves plenty of margin.

Pair the Cookies with a Best Gingerbread Houses Kit Pick

When the party wants something to build too, start from a gingerbread house kit to light up for the holidays.

Our top gingerbread house kit picks of 2026›